Victron MultiPlus Compact 12/1200/50-16 230V VE.Bus

**12V DC / 1200VA / 50A charge/ 230V AC**

1600VA model shown

Virtually unlimited power thanks to parallel operation: Up to 6 Multis can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.

Three-phase capability: In addition to parallel connection, three units of the same model can be configured for three-phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 2000 Amps charging capacity.

PowerControl to deal with limited generator, shore side or grid power: The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shoreside supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel, a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from overloading. 

PowerAssist: Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will ensure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Solar energy: AC power is available even during a grid failure The MultiPlus can be used in off-grid and grid-connected PV and other alternative energy systems. Loss of mains detection software is available.

System configuration:

  • In the case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
  • Parallel and three-phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
  • Off-grid, grid interactive and self-consumption applications involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications). 

On-site monitoring and control:  Several options are available: Battery Monitor, Multi Control Panel, Color Control GX or other GX devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

Remote monitoring and control:  Can be accomplished via a Color Control GX or other GX devices. Data can be stored and displayed on the Victron VRM website (Victron Remote Management), free of charge. 

Remote configuring:  When connected to the Ethernet, systems with a Color Control GX or other GX device can be accessed, and settings can be changed remotely. 

(CMP121220000)

Product Enquiry Form Complete this form to email us your enquiry.

 

SKU CMP121220000
Brand Victron
Shipping Weight 12.0000kg
Shipping Width 0.375m
Shipping Height 0.110m
Shipping Length 0.214m
Shipping Cubic 0.008827500m3
Unit Of Measure ea

Be The First To Review This Product!

Help other Sunergy Solar (REC-24310) users shop smarter by writing reviews for products you have purchased.

Write a product review