Loading... Please wait...
FREE Home Assessment


  • Image 1
  • Image 2

8.3 Metre (27') Guyed Tower Kit for Air Wind Turbines

6.60 KGS
Calculated at checkout

Product Details

This tower kit is designed specifically for the AIR 30 and AIR 40 wind turbines. To our knowledge this is the most economical and user friendly tower kit available for the “AIR” wind turbines. Guy wire supported construction allows the use of lightweight tubing while providing plenty of strength for all but hurricane conditions. Two people can easily erect a tower with this kit in an hour or so. Since the turbine and the tower kit are light in weight, no winches, vehicles or beasts of burden are needed to erect the tower. All that is required is a little bit of “elbow grease”. We recommend that at least two people be present when the tower is raised, although it is conceivable that a single person could actually raise a tower on their own.

8.3M Tower Kit for Air Wind Module Part List:

  • Wire set 1 
  • Tower Base Staples 2 
  • 3/8” x 1 ½” Bolts 2 
  • 3/8” Locknuts 2 
  • Cable Thimbles 4 
  • Cable Clamps 8

Tools Needed:

  • Round or Half Round File 
  • 5/16” or 8mm Wrench, Socket or Nut Driver (preferred) 
  • (2) 9/16” or 15mm Wrenches or Sockets 
  • Sledge Hammer 
  • Pliers 
  • Carpenters Level 
  • 5/16” allen wrench (supplied with turbine)

Items Not Included In This Kit:

  • Anchors (The type of anchors used will depend on the soil conditions at your tower site. This is explained further in the “Anchors” section of this manual.) 
  • Ground Rod and Clamp 
  • Lightning Arrestor * 
  • Junction Box and Adapter 
  • Flex Conduit and Fitting 

This product hasn't received any reviews yet. Be the first to review this product!

write a review