Loading... Please wait...
 
FREE Home Assessment

Categories

  • Image 1
  • Image 2
  • Image 3

13.7 Metre (45') Guyed Tower Kit for Air Wind Turbines

Price
$769.00
SKU:
1-TWA-10-02
Brand:
AIR
Weight:
13.20 KGS
Shipping:
Calculated at checkout


Product Details

This tower kit is designed specifically for the AIR 40 and AIR 30 wind turbines. To our knowledge this is the most economical and user-friendly tower kit available for the AIR wind turbines. Two level, guy wire supported construction allows the use of lightweight tubing while providing plenty of strength, even in high wind conditions. Two people can easily erect the kits in a few hours. Since the turbine and the tower kit are light in weight, no winches, vehicles or beasts of burden are needed to erect the tower. All that is required is the necessary tubing, the proper anchors for your soil, and a little bit of “elbow grease”. We recommend that at least two people be present when the tower is raised, although it is conceivable that a single person could actually raise a tower on their own.


The AIR tower kit includes a simple yet effective elbow/tee for its base. Combined with a short length of tubing this type of base eliminates the need for a concrete pad, base plate and a swivel for the base of the tower.

13.7M Tower Kit for Air Modules List:
Your tower kit includes:  

  • Tower Base x 1 
  • Upper Wire set x 1 
  • Lower Wire Set x 1 
  • Tower Base Staples x 2 
  • 3/8” x 1 ½” Bolts x 3 
  • 3/8” Lock-nuts x 3 
  • Cable Thimbles s 8 
  • Cable Clamps x 16

Tower Setup Kit Parts List

  • Gin Pole Cap x 1 
  • 100’ Rope x 1 
  • Snap Links – Work Load Rated to 400 x 3 
  • 8-foot Cable x 1 
  • 3/8” x 1 ½” Bolt x1 
  • 3/8” Lock-nut x 1

Tools Needed:

  • Round or Half Round File Pliers 
  • 5/16” or 8mm Wrench, Socket or Nut Driver (preferred) Carpenters Level (optional) 
  • (2) 9/16” or 15mm Wrenches or Sockets Torque Wrench (optional) 
  • Sledge Hammer 5/16 Allen Wrench (incl./w turbine)

Items Not Included In This Kit:

  • Anchors (The type of anchors used will depend on the ground makeup at your tower site. This is explained further in the “Anchors” section of this manual.) 
  • Tubing for Tower and Gin Pole 
  • Ground Rod and Clamp 
  • Lightning Arrestor * 
  • Junction Box and Adapter * 
  • Flex Conduit and Fitting * 
  • Electrical Wire 
  • Wire Connectors (preferably copper split bolts) 
  • Pipe Insulation (to prevent wire “rattle” inside pole) * 
  • Electrical tape

 

This product hasn't received any reviews yet. Be the first to review this product!

write a review